نویسنده: پریسا ظاهری ، حسین ابوالقاسمی ، محمد قنادی مراغه ، مریم ظاهری | |
کلیدواژهها : مدل تجربی ، اندازه قطرهها ، عامل فعال سطحی ، جزء منتقلشونده ، میکسر-ستلر | |
کلیدواژهها (انگلیسی): Surfactant , Solute , Mixer-settler , Empirical model , Drop size | |
چکیده: در بیشتر تجهیزات استخراج صنعتی، مقادیر کمی آلودهکنندههای فعال سطحی که به طور اجتنابناپذیر وجود دارد، میتوانند اثرات عمیقی بر رفتار قطرهها داشته باشند. بدین منظور آزمایشهای متعددی برای بررسی اثر حضور عامل فعال سطحی آنیونی سدیم دودسیل سولفات (SDS) بر اندازه قطرهها در شرایط هیدرودینامیکی مختلف و در حضور جزء منتقلشونده (استن) در یک دستگاه میکسر-ستلر افقی انجام شده است. آزمایشها در غلظتهای مختلف SDS به همراه یک غلظت ثابتی از استن و در هلدآپها و دورهای مختلف همزن انجام شده است. نتایج نشان میدهند که در حضور غلظتهای پایین از SDS، اندازه قطرهها کاهش شدیدی از خود نشان میدهند، ولی در غلظتهای بالا با افزایش آن تغییر در اندازه قطرهها کمتر میشود. همچنین برای غلظتهای مختلف SDS، یک مدل تجربی برای میانگین اندازه قطرهها ارائه شده است. |
چکیده (انگلیسی):
Drop size distribution in a mixer-settler is an essential design parameter, as obtaining drop size distribution will result in optimum performance of equipment. In this paper for obtaining drop size, several experiments have been performed with a single stage horizontal mixer-settler. A video technique has been used in order to measure the drop size in the mixer-settler with the help of a digital camera. The present work examines the influence of an anionic surfactant concentration on the variation of drop sizes in the presence of solute. The results show that in low concentration of surfactant, a significant decrease in mean drop size is observed, but at high concentration, increasing of surfactant concentration doesn’t change mean drop size more. For different concentration of surfactant, a new empirical correlation is derived for estimation of mean drop size. These correlations have a good agreement with experimental data.